Glossary

Maritime glossary, terms beginning with I (page 10)

All maritime glossary terms that begin with the letter I, drawn from every subject section. 2628 entries.

Showing 250 of 2628 terms (page 10 of 11).

Isle of Innisfree X85. Ferries, Ro-Pax Operators and Routes: Irish Ferries ro-pax in service on Dover to Calais.
Isle of Lewis X85. Ferries, Ro-Pax Operators and Routes: CalMac ro-pax built 1995 deployed on Hebridean services.
Isle of Man Ship Registry X7. Flag State, Port State Control and Detention Vocabulary: IOMSR, British Red Ensign register based in Douglas.
Isle of Man Steam Packet Company X39. Pre-1900 Maritime History: Founded in 1830 and the longest continuously operating passenger steamship company in the world.
Isle of Wight X84. Yacht Racing, Regattas and Sailing Governance: Site of the 1851 race that originated the America's Cup, off the south coast of England.
ISM X19. Engine Room Watchkeeping and UMS Operations: International Safety Management Code governing onboard procedures and maintenance.
ISM audit C2. Ship operations, crewing and technical management: Audit of safety management system under ISM Code.
ISM Audit Survey X43. Marine Surveying and Warranty Surveying: A safety management system audit under the International Safety Management Code, leading to issue of the Safety Management Certificate.
ISM Certificate Verification X86. Port Agency, Husbandry and Disbursement: Verification of valid ISM documents by the agent.
ISM Clause (BIMCO) X17. Chartering, Shipbroking and Freight Trading: Warrants compliance with the International Safety Management Code.
ISM Code A2. Maritime safety legislation: SOLAS and its codes: International Safety Management Code, mandatory under SOLAS IX.
ISM Code Compliance X40. Tanker Vetting, SIRE and VIQ: Demonstrated conformity with the International Safety Management Code, verified under VIQ Chapter 2.
ISM Code Cyber Integration X48. Maritime Cybersecurity: Inclusion of cyber risk management within the International Safety Management Code as required by Resolution MSC.428(98).
ISM Code Deficiency X66. Port State Control and Regional MOUs: 15000 series deficiency category.
ISM Code on yachts X156. Superyacht Industry, Builders, and Yacht Charter Market: International Safety Management Code requirements applied to commercial yachts above 500 GT under the Large Yacht Code through the flag and the Document of Compliance.
ISM Code Section 7 X36. Shipboard Medical, Telemedicine and Seafarer Health: Requires written procedures for shipboard operations including medical emergencies.
ISM Compliance Warranty X4. Marine Insurance, P&I and Claims: clause requiring compliance with the International Safety Management Code.
ISM Deficiency X146. Port State Control Regimes, MoUs, and Inspection Systems: A 15xxx code recorded against shortcomings in the safety management system, including major non-conformities that often lead to detention.
ISM Phase 2 X158. IMO Conventions, Protocols, Codes, and Resolutions: Mandatory application of the ISM Code to all other cargo ships of 500 GT and above and MODUs from 1 July 2002.
ISMS X107. Maritime Cybersecurity and OT Security: Information Security Management System as defined by ISO/IEC 27001.
ISMS Information Security Management System X25. Maritime Cybersecurity, OT and IT: ISO/IEC 27001 management system for information security.
Iso (Isophase) X23. AIS, GMDSS, IALA Buoyage and Aids to Navigation: Light character with equal periods of light and darkness.
ISO 10307 X115. Marine Bunker and Cargo Surveying: International standard test method for total sediment in residual fuel oils, with parts addressing aged and existent sediment.
ISO 10307-1 X2. Marine Bunker Fuels, Lubricants and Bunkering Operations: Total sediment by hot filtration (TSP).
ISO 10307-2 X2. Marine Bunker Fuels, Lubricants and Bunkering Operations: Total sediment after thermal aging (TSA).
ISO 10370 X47. Marine Fuel Quality and ISO 8217: Determination of carbon residue by micro method.
ISO 10374 C3. Logistics, freight forwarding and multimodal trade: ISO standard for container automatic identification.
ISO 10478 X2. Marine Bunker Fuels, Lubricants and Bunkering Operations: Determination of aluminum and silicon in fuel oil by ICP-OES or AAS.
ISO 10816 X174. Marine Engine Maintenance, Overhaul, and Condition Monitoring: International standard on mechanical vibration evaluation by measurement on non-rotating parts, the bearing housing seismic standard.
ISO 10976 X20. LNG Operations and Custody Transfer: Refrigerated light hydrocarbon fluids; measurement of cargoes on board LNG carriers.
ISO 1161 X6. Container, Intermodal and Trade Codes: Corner fittings standard for series 1 containers.
ISO 12185 X2. Marine Bunker Fuels, Lubricants and Bunkering Operations: Density by oscillating U-tube.
ISO 12217 F4. Recreational Boating, Yachting and Sport: Standard for stability and buoyancy assessment of small craft.
ISO 12937 X47. Marine Fuel Quality and ISO 8217: Water in petroleum products by coulometric Karl Fischer titration.
ISO 12944 X45. Marine Paints, Coatings and Antifouling: International standard, parts 1 to 9, on corrosion protection of steel structures by protective paint systems.
ISO 12944-2 X45. Marine Paints, Coatings and Antifouling: Part defining atmospheric corrosivity categories C1 to C5 and CX and immersion categories Im1 to Im4.
ISO 12944-5 X45. Marine Paints, Coatings and Antifouling: Part specifying paint systems by binder type and corrosivity category.
ISO 12944-6 X45. Marine Paints, Coatings and Antifouling: Part covering laboratory performance tests for coating qualification.
ISO 12944-7 X45. Marine Paints, Coatings and Antifouling: Part on execution and supervision of paint work.
ISO 12944-8 X45. Marine Paints, Coatings and Antifouling: Part on specifications for new work and maintenance.
ISO 12944-9 X45. Marine Paints, Coatings and Antifouling: Part on protective coatings for offshore and related structures.
ISO 13174 X100. Marine Cathodic Protection and Anodes: The international standard for cathodic protection of harbor installations.
ISO 13628-8 X65. ROVs, AUVs, USVs and Marine Robotics: Standard for ROV interfaces on subsea production systems, the international counterpart of API 17H.
ISO 13686 X20. LNG Operations and Custody Transfer: Natural gas quality designation, referenced in pipeline gas specifications.
ISO 13739 X149. Marine Fuels, Bunkering, and Alternative Fuels: The international standard procedure for the transfer of bunkers, including continuous drip sampling and BDN content.
ISO 14001 C2. Ship operations, crewing and technical management: Environmental management standard often integrated with ISM.
ISO 14001 (Maritime) D6. Decarbonization, emissions and alternative fuels: Environmental management system standard.
ISO 14064 X34. Decarbonization, Alternative Fuels and Carbon Pricing: GHG quantification and verification standard.
ISO 14065 X34. Decarbonization, Alternative Fuels and Carbon Pricing: Accreditation standard for GHG verification bodies.
ISO 14532 X20. LNG Operations and Custody Transfer: Natural gas vocabulary used in custody transfer documentation.
ISO 14596 X47. Marine Fuel Quality and ISO 8217: Sulfur determination by wavelength dispersive XRF.
ISO 14597 X115. Marine Bunker and Cargo Surveying: International standard test method for vanadium and nickel in liquid fuels by X-ray fluorescence.
ISO 148-1 X92. Marine Steel Suppliers and Shipbuilding Plate: International standard for Charpy pendulum impact test on metallic materials.
ISO 1496 C3. Logistics, freight forwarding and multimodal trade: ISO standard for container specifications and testing.
ISO 1496-1 X46. Container Terminal Operations: The international standard specifying the structural design, testing, and rating requirements for general-purpose freight containers.
ISO 1496-2 X26. Reefer Containers and Cold Chain Logistics: Specification for thermal containers, defines structural and insulation requirements.
ISO 1496-3 X83. ISO Container Manufacturing and Leasing: International standard for tank container testing.
ISO 1496-4 X83. ISO Container Manufacturing and Leasing: International standard for non-pressurized dry bulk container testing.
ISO 1496-5 X83. ISO Container Manufacturing and Leasing: International standard for platform and platform-based containers.
ISO 15016 B4. Shipbuilding, Materials, Sea Trials, Retrofits and Recycling: Sea trial speed/power correction procedure.
ISO 15550 X174. Marine Engine Maintenance, Overhaul, and Condition Monitoring: International standard specifying methods for determination of engine power and reference conditions.
ISO 15589-1 X100. Marine Cathodic Protection and Anodes: The international standard for cathodic protection of pipeline transportation systems on land.
ISO 15589-2 X100. Marine Cathodic Protection and Anodes: The international standard for cathodic protection of pipeline transportation systems offshore.
ISO 16276 X45. Marine Paints, Coatings and Antifouling: Standard for assessment of adhesion and cohesion of protective paint systems.
ISO 1644:2024 X111. Methanol, Ammonia and Alternative Marine Fuels: International specification for methanol used as a marine fuel.
ISO 16711:2018 X115. Marine Bunker and Cargo Surveying: International standard for the determination of the mass of bulk cargoes carried in seagoing vessels by means of draft surveys.
ISO 16903 X20. LNG Operations and Custody Transfer: Characteristics of LNG influencing design and operation.
ISO 17029 X34. Decarbonization, Alternative Fuels and Carbon Pricing: Conformity assessment standard for validation and verification bodies.
ISO 17357 X173. Mooring, Anchoring, OCIMF MEG4, and Equipment Numeral: International standard for floating pneumatic fenders of the Yokohama type, defining grades and test methods.
ISO 17712 C3. Logistics, freight forwarding and multimodal trade: ISO standard for high security seals.
ISO 18132 X20. LNG Operations and Custody Transfer: Refrigerated light hydrocarbon fluids; general requirements for automatic level gauges.
ISO 18683 X20. LNG Operations and Custody Transfer: Guidelines for systems and installations for supply of LNG as fuel to ships.
ISO 19030 B1. Naval Architecture: Hull and propeller performance measurement.
ISO 19030-2 B4. Shipbuilding, Materials, Sea Trials, Retrofits and Recycling: Hull/propeller performance default method.
ISO 1940 X174. Marine Engine Maintenance, Overhaul, and Condition Monitoring: International standard on balance quality requirements for rotors in a constant rigid state, defining grades from G0.4 to G4000.
ISO 19840 X45. Marine Paints, Coatings and Antifouling: Standard giving rules for measuring DFT on rough surfaces using the 80/20 rule and correction factor.
ISO 19847 E3. Technology, digitalization and smart shipping: Shipboard data servers to share field data at sea.
ISO 19848 E3. Technology, digitalization and smart shipping: Standard data for shipboard machinery and equipment.
ISO 19901 X14. Offshore Oil and Gas Marine Operations: Series of ISO standards for offshore structures.
ISO 19901-7 X153. Offshore Drilling Rigs, FPSOs, and Offshore Vessels: International standard on station-keeping systems for floating offshore structures and mobile offshore units.
ISO 19904-1 X153. Offshore Drilling Rigs, FPSOs, and Offshore Vessels: International standard governing the design of floating offshore structures including ship-shaped and column-stabilized units.
ISO 19905-1 X153. Offshore Drilling Rigs, FPSOs, and Offshore Vessels: International standard for site-specific assessment of mobile offshore units, primarily jackups.
ISO 19906 X133. Polar Research Vessels and Polar Code Regimes: International standard for Arctic offshore structures, referenced in ice load design.
ISO 20088 X20. LNG Operations and Custody Transfer: Cryogenic spill protection materials test (parts 1 to 3) for terminal structural protection.
ISO 20519 X110. LNG Bunkering Infrastructure and Vessels: International standard published in 2017 and revised in 2021 covering specification for bunkering of LNG-fueled vessels.
ISO 20519:2017 X134. LNG and LPG Carrier Operators and Containment Systems: International standard for LNG bunkering of fueled vessels, specifying transfer procedures, hose and connector standards.
ISO 20816 X174. Marine Engine Maintenance, Overhaul, and Condition Monitoring: Updated international standard series superseding ISO 10816 and ISO 7919 for vibration measurement and evaluation of machine sets.
ISO 20846 X47. Marine Fuel Quality and ISO 8217: Sulfur determination by ultraviolet fluorescence.
ISO 20884 X47. Marine Fuel Quality and ISO 8217: Sulfur determination by wavelength dispersive XRF.
ISO 21593 X20. LNG Operations and Custody Transfer: LNG bunkering connections technical requirements for dry-disconnect/connect couplings.
ISO 22000 X26. Reefer Containers and Cold Chain Logistics: Food safety management system standard, applicable across the cold chain.
ISO 23800 B4. Shipbuilding, Materials, Sea Trials, Retrofits and Recycling: Voyage data recording standard.
ISO 23807 E3. Technology, digitalization and smart shipping: Smart shipping vocabulary (in development).
ISO 2719 X115. Marine Bunker and Cargo Surveying: International standard test method for flash point determination by Pensky-Martens closed cup tester.
ISO 27914 X57. Ocean Energy Beyond Wind: International standard for geological storage of carbon dioxide that informs offshore CCS project design.
ISO 28000 E1. Maritime security, geopolitics and risk: Supply-chain security management standard.
ISO 28001 X107. Maritime Cybersecurity and OT Security: International standard on security management systems for the supply chain.
ISO 28005 E3. Technology, digitalization and smart shipping: Electronic port clearance standard.
ISO 28007 X22. Piracy, Maritime Security and Armed Protection: Specification for PMSCs providing privately contracted armed security personnel on board ships, first issued as ISO/PAS 28007 in 2012 and as ISO 28007-1 in 2015.
ISO 28460 X20. LNG Operations and Custody Transfer: LNG installations and equipment; ship-to-shore interface and port operations.
ISO 30000 Series X50. Ship Recycling, Demolition and Hong Kong Convention: International Standard for ship recycling management systems, providing the audit framework underpinning many yard certifications.
ISO 30005 X50. Ship Recycling, Demolition and Hong Kong Convention: International Standard for ship recycling environmental management systems.
ISO 30006 X50. Ship Recycling, Demolition and Hong Kong Convention: International Standard for ship recycling industry information and reporting.
ISO 30007 X50. Ship Recycling, Demolition and Hong Kong Convention: International Standard for measures to prevent asbestos emission and exposure during ship recycling.
ISO 3016 X115. Marine Bunker and Cargo Surveying: International standard test method for pour point of petroleum products including residual marine fuels.
ISO 3046 X174. Marine Engine Maintenance, Overhaul, and Condition Monitoring: International standard for reciprocating internal combustion engines covering performance, declarations, ratings, and shop tests.
ISO 3104 X2. Marine Bunker Fuels, Lubricants and Bunkering Operations: Kinematic viscosity by capillary viscometer.
ISO 3170 X115. Marine Bunker and Cargo Surveying: International standard for manual sampling of liquid petroleum and petroleum products from tanks and pipelines.
ISO 3171 X115. Marine Bunker and Cargo Surveying: International standard for automatic pipeline sampling of liquid petroleum and petroleum products.
ISO 3448 X61. Marine Lubricants and Cylinder Oils: International Organization for Standardization classification of industrial lubricant viscosity grades.
ISO 35103 X133. Polar Research Vessels and Polar Code Regimes: Operations in Arctic conditions standard for occupational health and safety.
ISO 3675 X2. Marine Bunker Fuels, Lubricants and Bunkering Operations: Density by hydrometer.
ISO 3733 X2. Marine Bunker Fuels, Lubricants and Bunkering Operations: Water content by distillation.
ISO 3735 X47. Marine Fuel Quality and ISO 8217: Sediment in crude oils and fuel oils by extraction.
ISO 3837 X47. Marine Fuel Quality and ISO 8217: Hydrocarbon group analysis by fluorescent indicator adsorption.
ISO 3874 X9. Cargo Securing, Lashing and Stability Vocabulary: Standard for handling and securing of Series 1 freight containers.
ISO 3924 X47. Marine Fuel Quality and ISO 8217: Boiling range distribution of petroleum fractions by gas chromatography.
ISO 4259 X2. Marine Bunker Fuels, Lubricants and Bunkering Operations: Statistical interpretation of test data for petroleum products, used to assess spec compliance with precision.
ISO 4264 X47. Marine Fuel Quality and ISO 8217: Calculation of cetane index of middle distillate fuels by four-variable equation.
ISO 4267 X115. Marine Bunker and Cargo Surveying: International standard for petroleum measurement procedures for static measurement of liquid hydrocarbons in tanks.
ISO 4406 X174. Marine Engine Maintenance, Overhaul, and Condition Monitoring: International standard for fluid contamination cleanliness coding by particle count at 4, 6, and 14 micrometre thresholds.
ISO 4624 X45. Marine Paints, Coatings and Antifouling: Standard for pull-off adhesion testing of coatings.
ISO 6245 X47. Marine Fuel Quality and ISO 8217: Determination of ash from petroleum products.
ISO 6296 X47. Marine Fuel Quality and ISO 8217: Water in petroleum products by potentiometric Karl Fischer titration.
ISO 6346 C3. Logistics, freight forwarding and multimodal trade: ISO standard for container coding and marking.
ISO 6615 X47. Marine Fuel Quality and ISO 8217: Conradson carbon residue determination.
ISO 668 C3. Logistics, freight forwarding and multimodal trade: ISO standard for container classifications and dimensions.
ISO 6707 C4. Ports, terminals and coastal/marine civil engineering: ISO standard for buildings and civil engineering vocabulary.
ISO 6743 X61. Marine Lubricants and Cylinder Oils: Family of standards covering classification of lubricants by application.
ISO 6892-1 X92. Marine Steel Suppliers and Shipbuilding Plate: International standard for tensile testing of metallic materials at room temperature.
ISO 6976 X20. LNG Operations and Custody Transfer: Calculation of calorific values, density, relative density, and Wobbe Index from composition, used in LNG GHV.
ISO 7061 X32. Marine Pilotage and Pilot Operations: International standard for aluminum shore gangways used in combination arrangements.
ISO 7825 X173. Mooring, Anchoring, OCIMF MEG4, and Equipment Numeral: International standard covering anchor windlass design and testing.
ISO 7919 B1. Naval Architecture: Mechanical vibration of non-reciprocating machinery shafts.
ISO 799 X32. Marine Pilotage and Pilot Operations: International standard governing the construction of pilot ladders, incorporated by reference into SOLAS V/23.
ISO 799-1:2019 X159. Marine Pilotage, Pilot Districts, and Pilots' Associations: International Standard specifying construction, materials, and dimensions of marine pilot ladders, referenced by SOLAS V/23.
ISO 799-2:2021 X159. Marine Pilotage, Pilot Districts, and Pilots' Associations: International Standard covering maintenance and use of the pilot ladder.
ISO 799-3:2021 X159. Marine Pilotage, Pilot Districts, and Pilots' Associations: International Standard on attachments and associated equipment for pilot ladders, including securing strops and magnets.
ISO 8216-1 X2. Marine Bunker Fuels, Lubricants and Bunkering Operations: Classification of petroleum products for marine use.
ISO 8217 C2. Ship operations, crewing and technical management: International standard for marine fuel oil specifications.
ISO 8217:1987 X47. Marine Fuel Quality and ISO 8217: First edition of the marine fuel standard establishing the RM and DM grade framework.
ISO 8217:1996 X47. Marine Fuel Quality and ISO 8217: Second edition refining viscosity classes and introducing tighter cat fines control.
ISO 8217:2005 X47. Marine Fuel Quality and ISO 8217: Third edition aligning sulfur limits with then-current MARPOL Annex VI provisions.
ISO 8217:2010 X47. Marine Fuel Quality and ISO 8217: Fourth edition introducing the 60 mg/kg aluminum plus silicon cap and revised stability requirements.
ISO 8217:2012 X47. Marine Fuel Quality and ISO 8217: Fifth edition addressing biofuel allowance in distillate grades and adding hydrogen sulfide control.
ISO 8217:2017 X47. Marine Fuel Quality and ISO 8217: Sixth edition with renumbered distillate grades, DFA/DFZ/DFB FAME-containing grades, and updated stability/cleanliness requirements.
ISO 8217:2024 X111. Methanol, Ammonia and Alternative Marine Fuels: Specification of petroleum products for fuels for marine diesel engines, including grades incorporating biofuel content.
ISO 830 X26. Reefer Containers and Cold Chain Logistics: Container terminology standard.
ISO 8501-1 X45. Marine Paints, Coatings and Antifouling: Standard defining visual assessment of rust grades and preparation grades St 2, St 3, Sa 1, Sa 2, Sa 2.5, and Sa 3.
ISO 8501-2 X88. Marine Surface Preparation and Coatings Application: International standard defining preparation grades for previously coated steel by localized cleaning, denoted P Sa, P St, and P Ma plus the grade number.
ISO 8501-3 X45. Marine Paints, Coatings and Antifouling: Standard on preparation grades for welds, edges, and other areas with surface imperfections.
ISO 8501-4 X88. Marine Surface Preparation and Coatings Application: International standard defining initial rust grades and preparation grades Wa 1, Wa 2, Wa 2.5, and Wa 3 for high- and ultra-high-pressure water-jetted steel.
ISO 8502 X45. Marine Paints, Coatings and Antifouling: Standard series on tests for the assessment of surface cleanliness, including soluble salt and dust measurements.
ISO 8502-12 X88. Marine Surface Preparation and Coatings Application: International standard for field determination of water-soluble ferrous ions by Merck Quantofix or equivalent test paper.
ISO 8502-3 X45. Marine Paints, Coatings and Antifouling: Standard for assessment of dust on prepared surfaces using pressure-sensitive tape.
ISO 8502-4 X88. Marine Surface Preparation and Coatings Application: International standard providing guidance on estimating the probability of condensation prior to coating application using wet-bulb and dry-bulb measurements.
ISO 8502-6 X45. Marine Paints, Coatings and Antifouling: Bresle method for extraction of soluble contaminants from a surface for analysis.
ISO 8502-9 X88. Marine Surface Preparation and Coatings Application: International standard for field determination of water-soluble salts by conductometric method.
ISO 8503 X45. Marine Paints, Coatings and Antifouling: Standard for surface profile assessment using comparators or stylus instruments.
ISO 8503-1 X88. Marine Surface Preparation and Coatings Application: International standard specifying the technical requirements for ISO surface profile comparators.
ISO 8503-2 X88. Marine Surface Preparation and Coatings Application: International standard describing the method for grading the surface profile of abrasive blast cleaned steel using the comparator.
ISO 8503-3 X88. Marine Surface Preparation and Coatings Application: International standard describing calibration of ISO surface profile comparators by focusing microscope.
ISO 8503-4 X88. Marine Surface Preparation and Coatings Application: International standard describing calibration of ISO surface profile comparators and assessment of profile by stylus instrument.
ISO 8503-5 X88. Marine Surface Preparation and Coatings Application: International standard describing the replica tape method for determination of surface profile.
ISO 8504 X45. Marine Paints, Coatings and Antifouling: Standard giving guidance on methods for the preparation of steel substrates.
ISO 8504-1 X88. Marine Surface Preparation and Coatings Application: International standard providing general principles for surface preparation methods.
ISO 8504-2 X88. Marine Surface Preparation and Coatings Application: International standard describing abrasive blast cleaning methods including air, vacuum, and centrifugal wheel.
ISO 8504-3 X88. Marine Surface Preparation and Coatings Application: International standard describing hand and power tool cleaning methods.
ISO 8504-4 X88. Marine Surface Preparation and Coatings Application: International standard describing acid pickling for removal of mill scale and rust.
ISO 8666 F4. Recreational Boating, Yachting and Sport: Standard for principal data of small craft.
ISO 8754 X2. Marine Bunker Fuels, Lubricants and Bunkering Operations: Sulphur in petroleum products by EDXRF.
ISO 8943 X20. LNG Operations and Custody Transfer: Refrigerated light hydrocarbon fluids; sampling of LNG continuous and intermittent methods.
ISO 9001 C2. Ship operations, crewing and technical management: Quality management standard often integrated with ISM.
ISO 9001 (Chandler) X120. Marine Catering, Provisions and Ship Chandlers: Quality management standard commonly held by tier-one ship suppliers.
ISO 9001 Certified Agency X86. Port Agency, Husbandry and Disbursement: Agency firm certified to ISO 9001 quality management standard.
ISO 91 X115. Marine Bunker and Cargo Surveying: International standard for petroleum measurement tables providing volume correction factors to 15 degrees C, replacing legacy ASTM Table 54B usage.
ISO 91:2017 X115. Marine Bunker and Cargo Surveying: Revised edition of ISO 91 consolidating petroleum measurement tables aligned with API MPMS Chapter 11.1.
ISO 9367 X9. Cargo Securing, Lashing and Stability Vocabulary: Standard for lashing and securing arrangements on ro-ro ships, Parts 1 and 2.
ISO 9897 X83. ISO Container Manufacturing and Leasing: International standard for the container equipment data exchange CEDEX codes.
ISO container X15. Ports, Terminals and Stevedoring: standardized intermodal container per ISO 668.
ISO Sample X5. Marine Surveying and Inspection: Cargo sample drawn by recognized ISO methodology.
ISO Tank X75. IMDG Code, Classes, Packing and Segregation: Common industry term for a UN portable tank built to ISO 1496/3.
ISO Tank Container X1. Cargo Science, Commodities and Cargo Care: Stainless steel cylindrical tank in 20' ISO frame for liquid bulks.
ISO Tank Container (T75) X110. LNG Bunkering Infrastructure and Vessels: Cryogenic ISO tank container compliant with UN portable tank T75 specifications, used in containerized LNG bunkering.
ISO TC 8 Plenary X119. Maritime Conferences, Trade Shows and Awards: Annual plenary meeting of ISO Technical Committee 8 on ships and marine technology.
ISO TS 22441 X140. Ammonia as Marine Fuel and Hydrogen Shipping: Technical specification 2022 by ISO TC8 on guidance for marine systems using ammonia as fuel.
ISO VG X61. Marine Lubricants and Cylinder Oils: ISO viscosity grade designating kinematic viscosity at 40 degrees Celsius.
Iso-conditions X34. Decarbonization, Alternative Fuels and Carbon Pricing: Reference ambient conditions used in EEDI verification.
ISO/IEC 17025 X115. Marine Bunker and Cargo Surveying: International standard for the competence of testing and calibration laboratories, the accreditation baseline for fuel test labs.
ISO/IEC 27001 E1. Maritime security, geopolitics and risk: Information security management standard widely adopted in shipping.
ISO/IEC 27001:2022 X25. Maritime Cybersecurity, OT and IT: Information security management system standard, current edition published October 2022.
ISO/IEC 27002 X48. Maritime Cybersecurity: Code of practice providing information security controls referenced by ISO/IEC 27001 implementations.
ISO/IEC 27002:2022 X25. Maritime Cybersecurity, OT and IT: Code of practice for information security controls.
ISO/IEC 27005 X25. Maritime Cybersecurity, OT and IT: Guidance on information security risk management.
ISO/IEC 27017 X25. Maritime Cybersecurity, OT and IT: Code of practice for information security controls for cloud services.
ISO/IEC 27019 E1. Maritime security, geopolitics and risk: Information security for process control in energy/utilities, mirrored in OT.
ISO/PAS 23306:2020 X115. Marine Bunker and Cargo Surveying: Publicly available specification for LNG as a fuel, used in LNG bunker quality and quantity transfers.
ISO/TS 18683 X110. LNG Bunkering Infrastructure and Vessels: ISO technical specification published in 2015 providing guidelines for systems and installations for the supply of LNG as fuel to ships.
Isobar B3. Nautical Science: Line of equal atmospheric pressure on synoptic chart.
Isobaric Counterdiffusion X82. Saturation Diving and Offshore Diving Operations: ICD, simultaneous inward and outward movement of different gases across tissue at constant pressure.
Isocyanate X45. Marine Paints, Coatings and Antifouling: Reactive group in polyurethane Component B providing crosslinking.
Isogonal (isogonic line) X16. Nautical Science, Navigation and COLREGs: Line of equal magnetic variation.
Isogonic line B3. Nautical Science: Line of equal magnetic variation.
Isogriv X16. Nautical Science, Navigation and COLREGs: Line of equal grid variation.
Isohaline D1. Physical and chemical oceanography and marine meteorology: Line of constant salinity.
Isohel X16. Nautical Science, Navigation and COLREGs: Line of equal sunshine duration.
Isolated Danger Mark X23. AIS, GMDSS, IALA Buoyage and Aids to Navigation: IALA mark with black body and one or more red bands and a topmark of two black spheres, placed over isolated hazards.
Isolation cabin X24. Cruise, Passenger Ship and Ferry Operations: Designated cabin used for guests under medical isolation for communicable disease.
Isolation of energy sources X147. Ship Recycling, Hong Kong Convention, and Recycling Yards: Mandatory lockout, tagout, and de-energization of vessel systems before dismantling begins.
Isolation Transformer X67. Marine Electrical Systems and Shore Power: Transformer separating the shore power supply from the ship system to eliminate ground loops.
Isophthalic gelcoat X45. Marine Paints, Coatings and Antifouling: Polyester gelcoat used on GRP hulls, generally not a category of marine paint.
Isopod X10. Marine Biology, Fisheries and Oceanography: Crustacean of the order Isopoda, including marine forms like *Bathynomus giganteus*.
Isopropanol X93. IBC Code and Chemical Tanker Operations: Alcohol (CH3)2CHOH assigned UN 1219, carried as a Type 3 ship cargo, Category Y under MARPOL Annex II.
Isopycnal D1. Physical and chemical oceanography and marine meteorology: Surface of constant potential density.
Isostatic Rebound D5. Coastal processes, sea-level, cryosphere and ocean observation science: Crustal uplift after removal of an ice load.
Isotainer X83. ISO Container Manufacturing and Leasing: Trade term for an ISO tank container, especially in industrial gas service.
Isotherm D1. Physical and chemical oceanography and marine meteorology: Line of constant temperature.
Isothiazolinone X45. Marine Paints, Coatings and Antifouling: Class of biocides including DCOIT used in antifouling formulations.
ISPM 15 C3. Logistics, freight forwarding and multimodal trade: Phytosanitary standard for wood packaging material.
ISPP Certificate A3. Marine environmental legislation: MARPOL and its annexes: International Sewage Pollution Prevention Certificate under MARPOL Annex IV.
ISPS X15. Ports, Terminals and Stevedoring: see International Ship and Port Facility Security Code.
ISPS Audit Survey X43. Marine Surveying and Warranty Surveying: A security audit under the International Ship and Port Facility Security Code leading to issue of the International Ship Security Certificate.
ISPS Clause (BIMCO) X17. Chartering, Shipbroking and Freight Trading: Allocates security-related costs and delays under the ISPS Code.
ISPS Code A2. Maritime safety legislation: SOLAS and its codes: International Ship and Port Facility Security Code, mandatory under SOLAS XI-2.
ISPS Code Compliance X40. Tanker Vetting, SIRE and VIQ: Demonstrated conformity with the International Ship and Port Facility Security Code, verified under VIQ Chapter 7.
ISPS Code Deficiency X66. Port State Control and Regional MOUs: 16000 series deficiency category.
ISPS Code Interface X48. Maritime Cybersecurity: Coordination between the International Ship and Port Facility Security Code and cyber risk management, particularly at facilities under USCG NVIC 01-20.
ISPS Code on yachts X156. Superyacht Industry, Builders, and Yacht Charter Market: International Ship and Port Facility Security Code applied to commercial yachts above 500 GT carrying 12 passengers or fewer in international service.
ISPS Code training X21. STCW Certificates, Crewing and Seafarer Welfare: STCW Regulation VI/5 and VI/6 covering SSO, DSD, and security awareness duties.
ISPS Compliance X150. Tanker Vetting: OCIMF SIRE, CDI, RightShip, and TMSA: The IMO security code whose audit history, SSP, and ship security records are verified during vetting.
ISPS Compliance Check X86. Port Agency, Husbandry and Disbursement: Verification of ISPS Code compliance on arrival.
ISPS Declaration of Security X86. Port Agency, Husbandry and Disbursement: Declaration agreed between vessel and port facility on security measures.
ISPS Deficiency X146. Port State Control Regimes, MoUs, and Inspection Systems: A 16xxx code recorded against ship security shortcomings, with significant security deficiencies leading to detention or expulsion.
ISPS Part A X22. Piracy, Maritime Security and Armed Protection: Mandatory section of the ISPS Code containing detailed requirements.
ISPS Part B X22. Piracy, Maritime Security and Armed Protection: Recommendatory guidance for implementing Part A.
ISPS surcharge X6. Container, Intermodal and Trade Codes: Carrier fee recovering ISPS compliance costs.
Israel Dredging Co X175. Port Engineering, Dredging, Breakwaters, and Quays: Dredging company active in Israeli and Mediterranean ports.
Israel PSC X66. Port State Control and Regional MOUs: Mediterranean MOU member State.
Israeli Ports Cyber Friction X48. Maritime Cybersecurity: Series of reported cyber incidents and operational disruptions affecting Israeli port infrastructure since 2020, including the Shahid Rajaee event widely reported as Israeli linked.
ISS LBH X86. Port Agency, Husbandry and Disbursement: Inchcape Shipping Services LBH entity active in Latin America and other regions.
ISSA Catalogue X120. Marine Catering, Provisions and Ship Chandlers: Companion product reference to IMPA Marine Stores Guide, 6-digit coding system.
ISSA Code X120. Marine Catering, Provisions and Ship Chandlers: 6-digit numeric identifier in the ISSA Catalogue, distinct from the 5-digit IMPA scheme.
ISSA Quality Standard X120. Marine Catering, Provisions and Ship Chandlers: Voluntary baseline service standard for ISSA member chandlers.
ISSC X5. Marine Surveying and Inspection: International Ship Security Certificate under ISPS Code.
Issue Date X73. Marine Hydrography, Charting and ENC: The date a new edition of an ENC cell becomes effective.
Issue of arbitral proceedings X152. Maritime Arbitration and Dispute Resolution: Formal commencement step recognized for limitation purposes under section 14 of the English Arbitration Act 1996.
Issued For Construction Drawing X104. Project Cargo Forwarders and Heavy Transport: Final engineering drawing released to enable site construction and rigging.
Issuing Surveyor X43. Marine Surveying and Warranty Surveying: The signatory surveyor who issues the formal certificate or report on behalf of the attending firm or recognized organization.
Istanbul Technical University Maritime Faculty X121. Maritime Education, Academies and Universities: ITU Maritime in Tuzla, founded 1884 as the Imperial School for Naval Architecture, offers Maritime Transportation Engineering and Marine Engineering BSc programs.
Istanbul University Faculty of Aquatic Sciences X121. Maritime Education, Academies and Universities: Provides marine and inland fisheries education distinct from ITU's officer training.